• New
search

Digital Temperature Controller

$13.00
No tax
Quantity
In-stock

It is a digital temperature controller module.LCD display, very clear, easy to use, powerful. It can be widely used at Smart home, Industrial control, Automatic irrigation, Indoor ventilation. 

Features:

LCD display;

Power-down memory function;

Emergency stop function;

Real-time display temperature;

Automatically save parameters;

Support UART Set;

Support Heating and Cooling work mode;

High temperature buzzer alarm;

Work status indicator;

Independent of parameters;

With case, beautiful and practical;

High precision;

Multiple parameters are displayed simultaneously.

Parameters:

Product Number:XY-WT01

Working Voltage: DC 6V-30V

Control Load Current:10A(Max)

LCD refresh rate: 0.5 second

Temperature Sensor: NTC-10K B3950

Test temperature: -50~110℃

Control precision:0.1℃

Sensor length: 0.5 meter

Sensor probe specifications: 4*30mm Stainless steel

Physical dimension: 79*44*26mm

Operating Humidity:5%~95%RH

Work Mode:

’ H ’: Heating mode.

Relay will turn ON and the heating device starts to work when Current Temperature Value is less than Setting Temperature Value - Return Temperature Value.

Relay will turn OFF and the heating device stops to work when Current Temperature Value is more than Setting Temperature Value.

’ C ’: Cooling mode.

Relay will turn ON and the cooling device starts to work when Current Temperature Value is more than Setting Temperature Value + Return Temperature Value.

Relay will turn OFF and the cooling device stops to work when Current Temperature Value is less than Setting Temperature Value.

’ OPH ’: ON/OFF delayed start.

The system starts timing 'T' when a normal heating or cooling operation is completed.The system will begin the next round of heating or cooling only after 'T'>'OPH'.

’ OFE ’: Temperature correction function (-10.0~10.0℃).

If the module works for a long time, there may be deviations. Corrected by this function.

Actual Temperature Value = Current Temperature Value + Calibration Value.

’ ALA ’: Set high temperature alarm.

Module will turn on the sound and light alarm and relay will OFF at the same time when Current Temperature Value is more than Set Alarm Temperature Value.Any button to stop the sound and light alarm.

Set Parameter :

Long press: keep press button for more than 3 second.

1>.Set Working mode/Setting temperature/Return Temperature Value

1.1>.Short press button 'SET' and enter the quick setting interface;

1.2>.Switch the parameters that need to be set for Working mode/Setting temperature/Return Temperature Value by short press button 'SET'.

1.3>.Modify the parameter value by button 'UP' or 'DOWN' after select parameter.Support short press/long press;

1.4>.Exit the quick setting interface and save the parameters by long press button 'SET' for 3second or continue 6S without any button operation.

NOTE:The Return Temperature Value display in the first line where the Current Temperature Value display position.

The Setting Temperature Value display in the second line after ‘H’ or ‘C’.

2>.Set OPH/OFE/ALA

2.1>.Long press button 'SET' and enter the parameter setting interface.

2.2>.Switch the parameters that need to be set for OPH/OFE/ALA by short press button 'SET'.

2.3>.Modify the parameter value by button 'UP' or 'DOWN' after select parameter.Support short press/long press;

2.4>.Exit the parameter setting interface and save the parameters by long press button 'SET' for 3second or continue 6S without any button operation.

2.5>How to turn on the high temperature alarm ‘ALA’ (default off).Select ‘ALA’ interface,short press button ‘STOP’ to ON or OFF ‘ALA’.Set high temperature value by button ‘UP’ or ‘DOWN’ if turn ON ‘ALA’.If the high temperature alarm function is turned OFF, ‘ALA’ displays ‘----’ as a reminder.LCD will display ‘W’ if turn ON ‘ALA’.

2.6>.How to enable delayed start ‘ OPH ’(default off).Select ‘ OPH ’ interface,short press button ‘STOP’ to ON or OFF ‘ OPH ’.Set delay time value by button ‘UP’ or ‘DOWN’ if turn ON ‘ OPH ’.If the delayed star function is turned OFF, ‘ OPH ’ displays ‘----’ as a reminder.LCD will display ‘h’ in last line and last bit if turn ON delayed start.

00347
2 Items

16 other products in the same category:

Reviews

Write your review

Digital Temperature Controller

Write your review